We are also going to explore what are all applications we can achieve with GSM modem other than sending text message by a human. It is the first digital protocol for mobile communication which is optimized for full duplex voice communication.
It is like a mobile phone without Screen and keypad. It also consist of RS port for serial communication between the modem and computer, however we are not going to use in this project.
It has standard DC power jack, which can be powered from external power sources such as voltage adapters.
It has working voltage ranging from 5 to 12V on DC jack, depending on the model. It has 3 LED indicators, for power, status, and network. Initially network LED blinks every one second while searching for network, once it establishes the mobile network it blinks every 3 seconds. This plan will give you a SIM card to insert into the cellular modem, giving the modem a cellular phone number. You must select a cellular modem that supports the frequency band s of your country and carrier.
A network cellular modem is connected to the same network as TopView. The cellular modem has an IP address on the network and TopView communicates to the cellular modem over the network.
There are no drivers required on the TopView machine. We recommend the MultiConnect rCell series modems. First we insert the SIM card into the modem, then we connect the antenna to the modem as well. Now we can connect the modem with the USB cable to the computer. Once the modem is successfully connected to the PC, the power led will light up to indicate that it is working.
Your browser does not support the video tag. This video tutorial shows you how you can install and configure an sms modem connection in Ozeki SMS Gateway. In this video we use a MultiTech MultiModem, which is automatically detected as the port by the Autodetect system. After it has been detected, we can turn the connection on and send a text message. We type in our message and phone number, then click on Send. We can see that the message was successfully sent and shows up on the mobile device.
All shown in Figure 2 Make sure that you have all the hardwares that you need to use the modem because every little detail is important. Figure 2 - The parts you need to connect the modem succesfully. The first step that you have to perform is to plug the SIM card into the modem.
This procedure is similar to inserting a SIM card to a mobile phone. The SIM card makes the connection between the modem and the network. Demonstrated in Figure 3. Figure 3 - The SIM card inserted into the modem.
After inserting the SIM card, you have to connect the modem to its antenna. Make sure that it is connected corretly in order to get best performance. The function of the antenna is to transmit and receive signal. Shown in Figure 4.
Figure 4 - The antenna connected to the modem. More help please click here. Privacy Policy Contact US. Provide verify SMS services. Designed for manage order,promotion, reminder, alert, special notice or statement.
NET Framework4. Why SMS Deliverer? Please refer to below points and check out your local telecom.
0コメント